This is a universal fan motor with a long shaft, suitable for some ovens and stoves. Part number is OVK103, C20X0E02/A2. It operates on 240VAC, equipped with 4 x 6.4mm spade terminals for connection and earthing. The shaft of this fan - forced oven fan motor is much longer than normal, fitting some well - known brands. It has 5 mounting holes: 3 in an equal triangle, 87mm apart, and 2 at 97mm apart. The distance between the backing plate and the fan blade is 42mm, and the depth between the backing plate and the rear of the motor is 65mm. The blade diameter is 152mm, and mounting screws are included. It runs on 220 - 240VoltsAC, 32Watts, 50Hz. It's easy to install and fully guaranteed. With over 25 years of experience in supplying appliance parts to both trade and retail, you can buy with confidence.
Using this fan motor is a breeze. First, make sure your oven or stove is unplugged or turned off. Align the motor using the 5 mounting holes (3 in an equal triangle 87mm apart and 2 at 97mm apart), then use the included mounting screws to secure it in place. Connect the 4 x 6.4mm spade terminals for power and earthing. Once everything is connected, plug in your appliance and turn it on. As for maintenance, keep the motor clean and free from dust and debris. Check the connections regularly to make sure they are tight. If you notice any unusual noises or performance issues, turn off the appliance immediately and contact a professional. Remember, this motor is fully guaranteed, so you can use it with peace of mind.
