This universal magnetic pump with flyleads, part number 111109, is a great fit for some Hoover, Simpson, and certain Asian washing machines. It's a Hanyu magnetic - style electric pump that offers a flow rate of 20 litres per minute at a 1 - metre height. The 60cm bare - end flyleads operate at 240VAC, 30Watt, 0.2Amp, and 50Hz. The mounting holes are on a 68mm diameter circle, and the threaded mounting bracket holes are 24mm apart, making it easy to install. The inlet diameters are 24mm and 36mm, while the outlet diameter is 23.5mm. With over 25 years of experience supplying appliance parts to both the trade and retail sectors, you can buy this pump with full confidence. It comes with a complete guarantee.
Using this pump is a breeze. First, make sure your washing machine is turned off and unplugged. Then, find a suitable spot on your machine to install the pump using the mounting holes on the 68mm diameter circle. The 24mm - apart threaded mounting bracket holes will help you secure it properly. Connect the 60cm bare - end flyleads to the appropriate power source, but remember it operates at 240VAC, 30Watt, 0.2Amp, and 50Hz, so use the right power supply. When it comes to maintenance, keep the pump clean. You can use a soft cloth to wipe it down from time to time. Check the inlet and outlet regularly to make sure there are no blockages. The inlet diameters are 24mm and 36mm, and the outlet diameter is 23.5mm, so any debris in these areas can affect performance. Also, if you notice any strange noises or reduced flow (it's supposed to give 20 litres per minute at 1 - metre height), turn it off immediately and contact us. Since it's fully guaranteed, we'll take care of any issues for you.
