Get the Plaset Magnetic Pump Motor designed for the Hoover Elite 1010, 1210 Series. It's a genuine part with number 43585422, H051S, replacing 43585401 and 12051310. Also known as Plaset No. COD. 48437. This pump features a large base, fitting many late - model Hoover washing machines such as Elite 1010 - 1070, 1210 - 1294, and various A - series models. It also works with some Admiral models. With a 38mm inlet and 27mm outlet, where the outlet is at a 90 - degree right - angle from the base. The mounting hole spacing is 42mm. It has 6.4mm spade terminals, runs on 240VAC, 50Hz, and 34Watt. (Note: if your original pump has 4.8mm terminals, change the crimp terminals on the wiring to 6.4mm). It's easy to install and comes with a full guarantee. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using your Plaset Magnetic Pump Motor is easy. First, make sure your washing machine is unplugged from the power source. Then, remove the old pump and replace it with this new one. Pay attention to the terminal size - if your old pump had 4.8mm terminals, change the wiring crimps to 6.4mm. When mounting, align the holes with a 42mm spacing. Plug the pump back into the power and start your washing machine. As for maintenance, keep the pump clean from dirt and debris. Check the terminals regularly for any signs of wear or damage. If you have any issues, our guarantee means you can rely on us for support.
