This is an early ignition electrode designed for Chef and Westinghouse gas ovens and stoves. It's an Electrolux part with the number 0049001165, which has been replaced by part No. 0049001119 and may need modification. The electrode is 76.2mm long including the spade terminal, and the tip is 32.6mm from the bracket. It's held in place by a single screw through a small metal bracket that's part of the electrode. Fitted with a 2.8mm spade terminal, it can fit most electronic ignition leads. This ignitor electrode is suitable for some early Chef and Westinghouse models like GEG1022BL*00, GEG1022BR*00, and many others. If you're not sure if it fits your model, just provide your full model number, sales code, or production code before buying, and we'll check for you. We've been supplying appliance parts to the trade and retail for over 25 years, so you can buy with confidence.
Using this ignition electrode is quite straightforward. First, make sure your oven is turned off and cooled down. Then, remove the old electrode carefully. Place this new electrode in position and secure it with the screw through the small metal bracket. Connect the 2.8mm spade terminal to the electronic ignition lead. When you're unsure if it fits your Chef or Westinghouse oven model, always check with us by providing your full model, sales, or production code. For maintenance, keep the electrode clean. Wipe it gently to remove any dirt or debris. If you notice any damage, replace it right away to keep your oven working well.
