This is an ignition spark plug electrode with a lead designed for Westinghouse gas cooktops, ovens, and stoves. It's the Electrolux part No. 305523001. The lead is 500mm long and comes with an insulated 2.8mm terminal, suitable for most electronic ignition modules. This ignitor electrode fits the wok burner in many early Westinghouse models such as WHG641SA, WHG956WA, WFE914SB, etc. If you're not sure if it's suitable for your model, just provide your model number, PNC, or sales code before buying. We've been supplying appliance parts to the trade and retail for over 25 years, so you can buy with confidence.
Using this Westinghouse gas stove wok ignition electrode is easy. First, make sure your gas stove is turned off. Then, connect the 500mm lead with the insulated 2.8mm terminal to the electronic ignition module. Install the electrode on the wok burner of your Westinghouse gas stove. When you're done, you can turn on the gas stove as usual. Before buying, check if your model number matches the suitable models like WHG641SA, WHG956WA, WFE914SB. If you're not sure, give us your model number, PNC, or sales code. To keep it working well, clean the electrode regularly. You can use a soft brush to remove dirt. Don't use harsh chemicals as they may damage the electrode. And always turn off the gas supply before doing any maintenance.
