Enecharger Battery Guardian is a top - notch 240Volt AC to 6 or 12Volt DC 1.0Amp automatic battery charger and maintainer (Part No. ICS1). With a 240Volt AC input, it offers a protected 6 or 12 Volt 1.0 Amp DC charge rate. As the battery charges, the current smoothly drops to a maintenance trickle rate. It comes with leads having alligator clamps and 8mm ring terminals, and you can also get optional leads for 6.4mm and 4.8mm spade terminals. An indicator light gives clear status signals: red for standby, blinking green for 12 - volt charge, and blinking blue for 6 - volt charge. It features reverse polarity protection and short - circuit protection, making it super safe. This charger is suitable for all sealed lead - acid rechargeable batteries like SLA, VRLA, Wet, AGM, MF, GEL, with a battery capacity of 4 - 20 AH. Note that it's not for use as an AC/DC adaptor for operating equipment. It helps you save both time and money. We've been in the appliance parts supply business for over 25 years, so you can buy with full confidence.
Using this battery charger is easy. First, make sure the charger is turned off. Connect the charger leads to the battery terminals. You can use the alligator clamps or 8mm ring terminals that come with it, or the optional 6.4mm and 4.8mm spade terminals if needed. Plug the charger into a 240Volt AC power source. The indicator light will show the charger's status. Red means it's on standby, blinking green is for 12 - volt charge, and blinking blue is for 6 - volt charge. When the battery is charging, the current will automatically drop to a maintenance trickle rate as it gets full. Important things to note: don't use it as an AC/DC adaptor for operating equipment. Also, be careful with the polarity when connecting to the battery to avoid reverse polarity. For maintenance, keep the charger in a dry and cool place. Check the leads regularly for any signs of damage. If you have any problems, you can rely on our 25 - year - long experience in the business for support.
