The Wilson Universal 2500-Watt Fan-Forced Oven Element with Three Loops and Bracket is a top - notch replacement part. It has a Part No. of FE - 07 or FE07 and can replace discontinued Electrolux Part Nos. like ET482758, ET482099, ET482325, as well as other numbers such as 7.T25.00437482758 and Ego 20.40985.000. Operating at 2500 Watts and 240 Volts, this element has a 19 - cm diameter and an overall depth of 35 mm from the front to the mounting bracket. It features 6.4 - mm spade terminals on each end, protruding 37 mm behind the mounting bracket, with the element ends 25 mm apart. The mounting bracket comes with movable bolts and nuts spaced 55 - 80 mm apart. It fits some new Westinghouse and Electrolux ovens (e.g., POH967S*01, EOQ995X), and also many Smeg, Omega, Blanco, and AEG ovens. If you're not sure if it suits your oven, contact us with your full model number before buying. With over 25 years of experience supplying appliance parts to both trade and retail, you can buy with confidence.
Using this Wilson oven element is straightforward. First, make sure your oven is unplugged or the power is turned off. Remove the old element carefully following your oven's manual. Then, place this new element in the same position, aligning it properly. Connect the spade terminals to the corresponding slots. Once everything is connected, plug in the oven or turn the power back on. When using the oven, always keep an eye on it during the first few uses to ensure the element is working well. As for maintenance, clean the element regularly with a soft, dry cloth. Avoid using abrasive cleaners as they can damage the element. If you notice any signs of wear or if the oven isn't heating correctly, contact us right away. And remember, if you're not sure about installation or anything else related to this part, give us a call with your oven's full model number.
