This is a high - performance 2200W universal long - neck fan - forced oven element, Part No. UN14109. It's equivalent to Part No. FE - 13 and can replace many other parts like G379201, GN379201, 77X2277, etc. With a power of 2200W and 240Volt, the element has a 19cm diameter and an overall depth of 32mm from the front to the bracket. The adjustable mounting holes or studs on the fixed bracket are 53mm - 80mm apart. Each end of the element has dual 6.4mm spade terminals, and there's a 6.4mm earth terminal in the center of the bracket. The connecting bracket on the other side of the element has a 15mm slot for various fitting positions. It fits many newer Kleenmaid models such as TO50, TO60, etc., and also a large number of other brands like Brandt, De Deitrich, etc. We've been in the appliance parts business for over 25 years, so you can buy with confidence.
Using this oven element is easy. First, make sure your oven is unplugged or turned off at the circuit breaker. Then, find the old element and remove it carefully. Align the new element in place, using the adjustable mounting holes or studs to fit it properly. Connect the dual 6.4mm spade terminals at each end and the 6.4mm earth terminal in the center. For the connecting bracket on the other side, use the 15mm slot to adjust the fitting position. After installation, turn on the oven and check if it works. When using the oven, avoid overloading it with too much food. Keep the oven clean to ensure the element functions well. Regularly check the terminals for any signs of wear or damage. If you notice any problems, stop using the oven and contact a professional.
