This 2000-watt fan forced oven element, part number SE318, is a great fit for Omega, Blanco, Everdure, and Westinghouse underbench ovens. It has a 20.5cm diameter and an overall distance of 21.3cm from the opposite edge of the element to the bracket centre. With mounting holes 56mm apart on a fixed bracket and a central earth terminal, and 6.3mm spade terminals on each end. It runs at 230 volts (2175 watts at 240VAC). Similar to several other part numbers, it's a common type used in many models. Suitable for a wide range of Omega models like OO6AX, OO61P, etc. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using this oven element is easy. First, make sure your oven is turned off and unplugged for safety. Remove the old element carefully and then install this new one by aligning the mounting holes and connecting the spade terminals. When using the oven, don't overload it to avoid putting too much stress on the element. For maintenance, keep the oven clean. Wipe it down regularly to prevent dirt and debris from building up on the element. If you notice any issues like the oven not heating properly, check the connections first. And remember, always follow the safety instructions in your oven's manual.
