This 2300Watt, 240Volt fan - forced oven element from Technika is also compatible with Blanco models. Part No. SE900, 004067, it's equivalent to Part Nos. IM11 - 01, SE165, 500630, TEC500630. The element has a 19.5cm diameter and an overall depth of 28mm from the front to the bracket. The distance from the centre of the bracket to the centre of the far mounting hole is 25cm. The distances from the far mounting hole to the bracket holes are 25.5cm on one side and 25cm on the other. The mounting tab on the far side of the element is slightly off - centre. The mounting holes on the fixed bracket are 55mm apart. It fits many Baumatic, Technika, Linea, Venini & Blanco models. Note that we can't confirm if it suits individual model numbers due to lack of cross - references. You can decide its suitability from the listing's descriptions and photos. With over 25 years of experience supplying appliance parts to trade and retail, you can buy with confidence.
Using this oven element is straightforward. First, make sure your oven is turned off and unplugged for safety. Carefully remove the old element by unscrewing the mounting bolts. Then, place this new 2300Watt element in the same position and screw it in tightly. Plug your oven back in and you're ready to start using it. As for precautions, always ensure the oven is off before handling the element. Don't touch the element when it's hot to avoid burns. For maintenance, keep the element clean. You can use a soft, dry cloth to wipe off any debris. Regularly check the mounting bolts to make sure they're tight. If you notice any damage to the element, it's best to replace it right away. This way, you can keep your oven working well for a long time.
