This 2200-watt fan forced oven element comes with studs and is a perfect replacement part. Part number is SE111, 619008, similar to EU016 and RE0792/4. It can replace models like 10403, 806890217 (2200watt), BAC83, etc. It has the same dimensions as 806890122 (2600watt) and 806890386 (2700watt). Operating at 230 volts, it reaches around 2200 watts at 240VAC. The element has a 19.5cm diameter and an overall depth of 28mm from the front to the bracket. The mounting studs are 57mm apart on a fixed bracket. There's also a similar element with holes in the bracket instead of studs. This element fits many Omega and Smeg ovens, as well as some Technika and Whirlpool ovens such as SMEG SA398X, SA398X5, Omega OA3205X, OA3205W, Technika GHE06T, and Whirlpool ACE600IX. With over 25 years of experience supplying appliance parts to both trade and retail, you can buy with confidence.
Using this oven element is straightforward. First, make sure your oven is unplugged or the power is turned off. Then, remove the old element carefully and install this new one in its place, aligning the mounting studs properly. When operating the oven, you can set it to the desired temperature as usual. Just note that it operates at 230 volts and will reach around 2200 watts at 240VAC. For maintenance, keep the element clean. You can wipe it gently with a soft, dry cloth after it has cooled down completely. Avoid using abrasive cleaners as they may damage the element. Also, check the mounting studs regularly to ensure they are secure. If you notice any issues like loose connections or abnormal heating, stop using the oven and contact a professional for inspection.
