This is a universal bent tip L-shaped heating element for dishwashers. Part number is DWV115, similar to Baumatic part no. X672050310019 and Stokes NOB001. It has a power of 1800 Watts at 240 Volts. Sometimes, this part can cause the dishwasher to trip the earth leakage circuit breaker in the meterboard. The terminals are 24mm apart on a 55mm X 27mm bracket with a central mounting bolt. The arm length from the centre of the terminals to the far side is 335mm, and the arm length of the arm furthest from the terminals is 445mm. The far end of the element curves back in, and it has 6.4mm spade terminals. This heating element is suitable for numerous models and brands that use this type of element. It fits Baumatic models such as BDW13, BDW1SS, BDW1W, BDW2SS, BDW2W, BFD62W, EDW60SS, HL13, and also some Nobel, St. George, and D'Amani models. It's easy to install and comes with a full guarantee. We've been supplying appliance parts to the trade and retail sectors for over 25 years, so you can buy with confidence.
Using this dishwasher heating element is straightforward. First, make sure your dishwasher is turned off and unplugged. Then, locate the old heating element in your dishwasher and carefully remove it. Next, install the new DWV115 heating element in its place, following the correct terminal connections. Remember, the terminals are 24mm apart, so ensure a proper fit. Once installed, plug your dishwasher back in and turn it on. As for maintenance, keep an eye on the element to see if it's causing the earth leakage circuit breaker to trip. If so, you may need to have it checked. And in case you have any issues, you're covered by our full guarantee. Just reach out to us, and we'll help you out.
