This is a high - quality dishwasher heating element suitable for numerous Ariston, Indesit, Bosch, and Siemens models. Part number is DWV104 (also known as I 81 513004), and it's similar to part numbers 30568, 025665, 10.03.14.12., 294171, 212109, 152000. With a power of 2200Watt at 220Volt, this heating element might be the cause if your dishwasher trips the earth leakage circuit breaker on the meterboard. It features terminals 25mm apart on a 50mm X 27mm bracket with a central mounting bolt. The arm length from the centre of terminals to the far side is 380mm, and the long - arm length furthest from the terminals is 470mm. The arm closest to the terminals has slight bends near the terminals and is fitted with 6.4mm spade terminals. It's easy to install and comes with a full guarantee. We've been in the appliance parts supply business for over 25 years, so you can buy with confidence.
Using this dishwasher heating element is straightforward. First, make sure your dishwasher is turned off and unplugged for safety. Then, locate the old heating element and carefully remove it by disconnecting the terminals and unscrewing the mounting bolt. Next, attach the new heating element in the same position, connecting the 6.4mm spade terminals and tightening the central mounting bolt. Finally, plug in your dishwasher and turn it on. As for maintenance, keep an eye on the performance of your dishwasher. If you notice the breaker tripping again, it could be a sign that the element needs to be checked. Always handle the element gently to avoid bending the arms. And remember, this product comes with a full guarantee, so if you have any issues, don't hesitate to contact us.
