The Invensys hotplate simmerstat control is a great fit for Damani cooktops. It comes in part numbers MSA-V01-EZC, MSA-V01-C, MSA312, and MSA-312-TW. This M series infinite control stove switch has an isolated switch for the pilot lamp and an aux switch for the neutral. It features a 6mm D shaft and is mounted with two bolts, suiting some Damani cooktops. The contacts are rated at 13 Amp, with 8 terminals and 6 electrical connections. The mounting hole spacing is 20mm in one direction and adjustable from 20 - 28mm in the other. It also fits models like Euro PVC4H, Linea L11SS, Damani DCC64WSS, and Blanco BCCK64NX. If you're not sure if it's suitable for your appliance, just contact us with your brand and model number. With over 25 years of experience supplying appliance parts to both trade and retail, you can buy with confidence.
Using this Invensys simmerstat control is easy. First, make sure your cooktop is turned off and unplugged. Then, install the control according to the mounting hole spacing requirements. Connect the electrical connections carefully, following the terminal numbers. Once installed, you can use it to control the heat of your hotplate. When using, don't exceed the 13 Amp contact rating to avoid damage. For maintenance, keep it clean and dry. If you notice any issues, like the switch not working properly, contact us right away. Also, remember to check the suitability of this control with your specific cooktop model before installation.
