This is a single recessed 240VAC 10Amp power outlet, with part number AV - RPS01. It's an Australian 3 - wire 10 - amp recessed mains power socket. Ideal for use behind large appliances like refrigerators and microwave ovens, where having the mains plug recessed into the wall can save space and look neater. It's also a great option as an outlet on the back of professional audio equipment racks. This power outlet fits standard mounting brackets and power point cutouts. It has overall dimensions of 77mm high, 102mm wide, and 79.5mm in overall depth. For plaster walls, a minimum depth of 60mm is required, while for masonry walls, it's 70mm. The cutout dimensions are 76mm x 52mm, and the box section is 50mm deep. Please note that this item does not come with a switch. If it's connected to a fixed building supply, it should only be installed by a licensed electrician. With over 25 years of experience supplying appliance parts to both the trade and retail sectors, you can buy with confidence.
Using this Australian single recessed 240VAC 10Amp power outlet is quite simple. First, make sure your wall meets the depth requirements - 60mm for plaster walls and 70mm for masonry walls. Cut out the wall according to the specified dimensions of 76mm x 52mm. Then, fit the outlet into the standard mounting bracket and install it in the cut - out area. When plugging in your appliances, just insert the plug into the socket. Remember, this outlet doesn't have a switch, so if you want to turn off the power, you'll need to unplug the appliance. As for maintenance, keep the outlet clean and free from dust and debris. If you notice any signs of damage, like loose connections or a burnt smell, don't use it and call a licensed electrician right away. And always follow the rule: if it's for a fixed building supply, only a licensed electrician should install it.
