These high - quality carbon motor brushes from SEI (Part No. BT419) are a great fit for many models of AEG, Whirlpool, Electrolux, and Zanussi front loaders with a Sole motor. They come as a pair. Similar to BT421 but with the carbons facing the opposite way, they can replace a wide range of European front loader motor brushes. The carbon dimensions are 36mm long, 5mm thick, and 13mm wide. The mounting holes are 24mm apart, and the locating spikes are 18.5mm apart. The mounting holes are 19mm from the front end of the brushholder, and the front locating spike is 9mm from the front. The brushholder has PA6.6 - GF on the bottom, and the carbon brush has 28 09 93MF7 printed on the side. It features 4.8mm spade terminals and suits some models with a reverse - type Sole motor. With over 25 years of experience in supplying appliance parts to both trade and retail, you can buy with confidence.
Using these carbon motor brushes is quite straightforward. First, make sure your front - loader is turned off and unplugged for safety. Then, locate the old motor brushes in your machine. Remove the old ones carefully and replace them with these new brushes. Align the mounting holes and the locating spikes correctly to ensure a proper fit. When it comes to maintenance, check the brushes regularly for wear and tear. If they look very worn, it's time to replace them. Also, keep the area around the brushes clean to prevent dust and debris from affecting their performance. Remember, these brushes are designed for specific models of AEG, Whirlpool, Electrolux, and Zanussi front loaders with a Sole motor, so always double - check your appliance model before use.
