Upgrade your European front - loader washing machine with these top - notch carbon motor brushes. These brushes are compatible with AEG, Whirlpool, Electrolux, and Zanussi models that feature a Sole motor. The SP part numbers include BT104, BT - 104, BT_104, and they're similar to many other part numbers. The carbon brushes have dimensions of 35.5mm long, 5mm thick, and 13mm wide. The mounting holes are 24mm apart, and the locating spikes are 18.5mm apart. The mounting holes are 19mm from the front of the brushholder, and the front locating spike is 9mm from the front. The brushholder has PA66 - GF on the bottom, and the carbon brush may have 0607 93MF7 printed on the side. They come with 4.8mm spade terminals on the top and are suitable for models with the new - type Sole 105982 / 124309 motor. Some of the compatible AEG models are LAV54600, LAV64600, and many others. With over 25 years of experience supplying appliance parts, you can buy with confidence.
Using these carbon motor brushes is straightforward. First, make sure your front - loader washing machine is turned off and unplugged. Remove the old brushes carefully from the motor. Take note of how they're installed so you can put the new ones in the same way. Place the new carbon brushes in the brushholder and secure them properly. When it comes to maintenance, it's a good idea to check the brushes periodically. Look for signs of wear and tear like excessive shortening or damage. If you notice any issues, replace the brushes right away. Also, keep the motor area clean to prevent dirt and debris from affecting the brushes' performance. Remember, always follow safety precautions when working with electrical appliances.
