Universal motor carbon brushes, suitable for numerous European washing machines, come in a pair. These bare carbon brushes can replace many European front - loader motor brushes. SEI part number is BT404, equivalent to Beko 30534022. The brushes are marked with 3608, L93MF7. They measure 35mm in length, 6mm in thickness, and 12mm in width. Each brush is fitted with a copper braid, a spring, and a 2.7mm spade terminal. With over 25 years of experience supplying appliance parts to both trade and retail, you can buy with full confidence.
Using these motor brushes is easy. First, turn off your washing machine and unplug it from the power source to ensure safety. Then, locate the old motor brushes in your European front - loader washing machine and carefully remove them. Next, take the new brushes and insert them into the appropriate slots. Make sure they fit snugly and that the copper braid, spring, and 2.7mm spade terminal are properly connected. When you're done, plug the washing machine back in and turn it on. As for maintenance, it's a good idea to check the brushes every few months. Look for signs of excessive wear, like a very short length or damage to the copper braid. If you notice any problems, replace the brushes right away. Also, keep the area around the brushes clean to prevent dust and debris from interfering with their performance. And always remember to follow the safety instructions of your washing machine when handling these parts.
