This is a top - notch Sharp microwave oven turntable motor. The part numbers are RMOTDA133WRE0, MT8 - 2 4519, and MWM133. It's similar to RMOTDA091WRE0, M2LJ24ZA02, MWM91 and can replace motors like RMOTDA055WRE0, MULJ24ZB33, RMOTDA033WRE0, MULJ24ZA93, MWM33 which have a 20mm high motor body. With a power supply of 220/240VAC, 50Hz, it runs at 2.5RPM and consumes only 3.5Watts of power. The motor features 6.4mm spade terminals. The double flat shaft has a diameter of 7mm, a width of 5mm, and a height of 9mm from the top of the motor body, with a shaft length of 7mm. The motor body itself is 16mm high. We've been in the appliance parts business for over 25 years, offering parts to both trade and retail customers. So, you can buy with full confidence.
Using this Sharp microwave oven turntable motor is easy. First, make sure your microwave is unplugged. Then, carefully remove the old motor and install this new one in its place. Connect the 6.4mm spade terminals properly. When you plug in the microwave again, the motor should start turning the turntable. As for maintenance, keep the motor clean. You can use a dry cloth to wipe off any dust. If you notice any strange noises or the turntable stops turning, unplug the microwave right away. Check if the terminals are loose or if there's any visible damage to the motor. Remember, this motor works with 220/240VAC and 50Hz power supply, so don't use it with a different power source to avoid damage.
