This is a top - notch aftermarket turntable motor designed specifically for Sharp microwave ovens. The part numbers are MWM223 and MULJ23ZA13, and it can replace RMOTDA223WREO, RMOTDA223WRE0, and RMOTDA318WRZZ. Operating at 220/240VAC, with a speed of 2.3/2.7RPM and a frequency of 50/60Hz, it consumes only 2.5/2 Watts of power. It features 4.8mm spade terminals and a double - flat shaft. The shaft has a diameter of 7mm, a width of 5mm, and a height of 11.5mm from the top of the motor, with a shaft length of 9.5mm. The motor body is 20mm high. This motor is a perfect fit for a wide range of Sharp models, including R - 380A, R - 980A, R - 980C, R - 990CS, R - 980E, R - 980J, R - 990J(S), R - 990K, R - 990K(S), R - 990KW, R - 990K(W), R - 9900C(S) and many others. With over 25 years of experience in supplying appliance parts to both the trade and retail sectors, you can buy this product with full confidence.
Using this turntable motor for your Sharp microwave oven is easy. First, make sure your microwave is unplugged to avoid any electrical hazards. Remove the old motor carefully by following the microwave's user manual. Then, install the new motor in its place, connecting the 4.8mm spade terminals properly. Once installed, plug in your microwave and test it. When using the microwave, ensure that there is no excessive load on the turntable. As for maintenance, keep the motor clean and free from debris. If you notice any unusual noises or the turntable not rotating smoothly, unplug the microwave and check the motor connections. If the problem persists, it might be time to consult a professional technician.
