This universal 2.0 - metre cold water dual inlet hose is a must - have for your home appliances. One end features a 3/4' BSP straight nut and tail, while the other end has a 3/4' BSP right - angled nut and tail. Part No. is W045A, and it's similar to W045C, W045G, W046, and W046A. The grey pressure hose measures 2.0 metres by 10mm, with two 3/4' BSP nut and tails (actual thread diameter is 1'). It's only suitable for cold water, with a maximum temperature of 25°C. Included in the package are tap washers. This hose is a great fit for most dishwashers and all large, medium, and small washing machines where the inlet hoses are screwed onto the rear of the machine. However, it's not suitable for commercial machines like Maytag, Kleenmaid, Speed Queen, etc., which require longer - than - normal hoses. With over 25 years of experience supplying appliance parts to both trade and retail, you can buy this product with confidence.
Using this hose is easy. First, make sure your appliance is turned off and unplugged. Take the hose and connect the 3/4' BSP straight nut and tail end to the cold water tap. Then, connect the 3/4' BSP right - angled nut and tail end to the inlet on the back of your dishwasher or washing machine. Tighten the connections gently but firmly to avoid leaks. Remember, this hose is only for cold water. Don't use it with water that's hotter than 25°C. When it comes to maintenance, check the hose regularly for any signs of wear or damage, like cracks or leaks. If you notice any problems, replace the hose right away. Also, keep the hose clean by wiping it down occasionally. This way, your hose will last a long time and keep your appliances working well.
