Plastic Nut & Tail with Filter Washer & Clamp suits 10mm Hose - Part # HC033K

This fantastic kit features a 10mm plastic nut and tail, paired with a stainless - steel filter washer and a stainless - steel hose clamp. Part No. HC033K, it combines Part Nos. HC033, W009, and W010B. If you've got crimp - on fittings that are leaking, there's no need to replace the whole hose. Just take a sharp knife, cut off the old fitting, and use the provided hose clamp to install the new one. It's suitable for any washing machine or dishwasher with 10mm internal diameter inlet hoses. With over 25 years of experience supplying appliance parts to both the trade and retail, you can buy this product with complete confidence.

Using this product is a breeze. First, if you notice a leak from the crimp - on fitting of your washing machine or dishwasher's 10mm inlet hose, grab a sharp knife and carefully cut off the old fitting. Then, take the 10mm plastic nut and tail from the kit, along with the stainless - steel filter washer and hose clamp. Place the filter washer in the right position, attach the plastic nut and tail, and secure it tightly with the hose clamp. As for maintenance, it's a good idea to check the hose clamp every few months to make sure it's still tight. If you see any signs of rust on the stainless - steel parts, simply wipe them clean with a dry cloth. Remember, always make sure the appliance is turned off and unplugged before you start working on the hose.