HERBIE CLIP™ Nylon Hose Clamps come in a pack of 10, part number HC0642-10. These 6mm x 4mm clamps offer a superior alternative to metal clamps. With a minimum diameter of 5.6mm and a maximum of 6.5mm, a band width of 4.2mm, and a thickness of 1.4mm, they're precisely sized. The head has a height of 8.3mm and a maximum width of 17.5mm. Their patented double - jaw design provides 200psi strength. They're heat and UV stabilized, resistant to contaminants. Fitting or adjusting them is quicker and easier than metal clips. There are no sharp edges, enhancing operator safety. They clamp to a near - perfect circle, minimizing leak paths. Tools for fitting and removal are available for production use. Made of carbon - based polymer, they'll never rust or corrode. They're non - conductive, suitable for cable fixing, and cause no electrolytic reactions with other metals. With over 20 years of field use in various applications, they're a simple and cost - effective solution. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using these Herbie Clip nylon hose clamps is easy. First, choose the right location on the hose where you need to secure it. Then, simply place the clamp around the hose and use the appropriate fitting tool if you have one. Adjust the clamp to get a tight fit. Make sure it's snug but don't over - tighten as it might damage the hose. When removing the clamp, use the removal tool if available to avoid any damage. As for maintenance, these clamps are quite durable. Since they're heat and UV stabilized and resistant to contaminants, you don't need to worry much about environmental factors. However, check them periodically for any signs of wear and tear. If you notice any damage, replace the clamp promptly to ensure proper performance. They're also non - conductive, so they're safe to use around electrical components. Just handle them gently as you would with any other clamp, and you'll get long - lasting use out of them.
