HERBIE CLIP TM Nylon Hose Clamp (Pack of 10). Part No. HC3689-10. This 36mm x 9mm Herbie Clip offers a superior alternative to metal clamps. It has a minimum diameter of 34.3mm, a maximum diameter of 37.9mm, a band width of 8.9mm, a band thickness of 2.1mm, a head height of 13.5mm, and a maximum head width of 42mm. Its patented double - jaw design provides 200psi strength. It's heat and UV stabilized, resistant to contaminants. Easier and quicker to install or adjust than metal clips, it also enhances safety as it has no sharp edges. It clamps to a near - perfect circle, minimizing leak paths. There are fitting and removal tools for production use. Made of carbon - based polymer, it will never rust or corrode. It's non - conductive, suitable for cable fixing, and causes no electrolytic reactions with other metals. With over 20 years of field use in various applications, it's a simple and cost - effective solution. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using your Herbie Clip Nylon Hose Clamp is a breeze. First, choose the right spot on the hose where you need to secure it. Open the clamp and place it around the hose. Then, close it tightly. You can use the available fitting tools for production use to make the process even quicker. When removing, just use the removal tools. As for maintenance, these clamps are low - maintenance. Since they're heat and UV stabilized and impervious to contaminants, you don't have to worry much about environmental factors. However, it's a good idea to check them periodically for any signs of wear. Avoid using them in extreme conditions that are far beyond their specified strength. Also, when handling, be aware that although they have no sharp edges, still handle them gently to ensure their long - term performance.
