HERBIE CLIP TM Nylon Hose Clamps come in a pack of 10, part number HC2470-10. These clamps measure 24mm x 7mm. The minimum diameter (A) is 22.2mm, the maximum diameter (B) is 24.9mm, the band width (C) is 7.0mm, the band thickness (D) is 2.0mm, the head height (E) is 13mm, and the maximum head width (F) is 37mm. They offer a superior alternative to metal clamps. With a patented double - jaw design, they can handle 200psi of pressure. They are heat and UV stabilised, resistant to contaminants. Fitting or adjusting them is quicker and easier than metal clips. They are safer as there are no sharp edges to cut the operator. They create a minimal leak path as they clamp to a near - perfect circle. There are fitting and removal tools available for production use. Made of a carbon - based polymer, they will never rust or corrode. They are non - conductive, making them great for cable fixing, and there are no electrolytic reactions with other metals. They have over 20 years of field use in various applications. They are simple and cost - effective. We've been supplying appliance parts to the trade and retail for over 25 years, so you can buy with confidence.
Using these Herbie Clip nylon hose clamps is a breeze. First, make sure the hose and the fitting are clean and dry. Slide the clamp onto the hose, then place the hose over the fitting. Use the appropriate fitting tool to tighten the clamp until it's secure. When removing the clamp, use the removal tool to loosen it. Remember, don't over - tighten the clamp as it may damage the hose. Keep these clamps in a dry place away from direct sunlight to maintain their heat and UV stability. They're resistant to contaminants, but it's still a good idea to wipe them clean if they get dirty. Since they're made of a carbon - based polymer that won't rust or corrode, you don't have to worry about them degrading over time. Just use them as needed, and they'll serve you well in your various applications.
