HERBIE CLIP TM Nylon Hose Clamps come in a pack of 10, part number HC1971-10. These clamps measure 19mm x 7mm. The minimum diameter (A) is 18.1mm, the maximum diameter (B) is 20.6mm, the band width (C) is 7.1mm, the band thickness (D) is 2.1mm, the head height (E) is 12.7mm, and the maximum head width (F) is 35.7mm. They are a superior alternative to metal clamps. With a patented double - jaw design, they offer 200psi strength. They are heat and UV stabilized, resistant to contaminants. They are quicker and easier to install or adjust compared to metal clips. There are no sharp edges, enhancing safety for the operator. They form a near - perfect circle, minimizing leak paths. Tools for fitting and removal are available for production use. Made of carbon - based polymer, they never rust or corrode. They are non - conductive, making them great for cable fixing, and there are no electrolytic reactions with other metals. With over 20 years of field use in various applications, they are simple and cost - effective. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using these Herbie Clip Nylon Hose Clamps is a breeze. First, make sure the hose and the connection are clean and dry. Then, place the clamp around the hose at the desired position. You can use the available fitting tools for production use to easily tighten the clamp. If you need to adjust or remove it later, the removal tools come in handy. When handling the clamps, there's no need to worry about sharp edges, so you can work safely. For maintenance, since they are heat and UV stabilized and impervious to contaminants, there's not much you need to do. Just keep them away from extreme heat sources. They won't rust or corrode, so they'll last a long time in many different applications. Enjoy the simplicity and cost - effectiveness of these great clamps.
