HERBIE CLIP TM Nylon Hose Clamp, 10 per pack. Part No. HC1045-10. It's a 10mm x 4mm clip. The minimum diameter (A) is 9.2mm, maximum diameter (B) is 10.3mm, band width (C) is 4.5mm, band thickness (D) is 1.7mm, head height (E) is 10.9mm, and maximum head width (F) is 22.2mm. This nylon hose clamp is a great alternative to metal clamps. It features a patented double jaw design for 200psi strength. It's heat and UV stabilised, resistant to contaminants. It's quicker and easier to fit or adjust than metal clips. With no sharp edges, it improves safety. It clamps to a near perfect circle, reducing leak paths. There are fitting and removal tools for production use. Made of carbon based polymer, it will never rust or corrode. It's non conductive, suitable for cable fixing, and has no electrolytic reactions with other metals. It has over 20 years of field use in various fields and applications. It's simple and cost - effective. We've been supplying appliance parts for over 25 years, so you can buy with confidence.
Using the Herbie Clip Nylon Hose Clamp is easy. First, make sure the hose and the fitting you want to attach it to are clean. Then, open the clamp and place it around the hose at the right position. You can use the fitting tool if you're using it for production to quickly and accurately fit the clamp. Adjust it as needed to ensure a tight seal. When removing the clamp, you can use the removal tool. It's important to note that although this clamp is very strong and durable, don't over - tighten it as it might damage the hose. For maintenance, just keep it clean. Since it's resistant to contaminants, you can simply wipe it with a clean cloth if it gets dirty. There's no need to worry about rust or corrosion, so you can use it in different environments without any special protection.
