This fan oven element is designed for NZ - manufactured models. Part No. is NZ70178, and the Ego Part No. is EF20.35144.000. It's equivalent to Hermetic NZ70178H, Stokes 10343, and Grimwood GA260001. Similar to some other models but with distinct differences. It operates at 2400 Watts and 240 Volts. The diameter is 186mm, and the distance from the line between top ends to the bottom mounting hole is 214mm. It features single spade terminals pointing straight back, unlike others with dual spade - terminals at right - angles. This element suits certain late - model Westinghouse stoves, such as models PAH808W, PAJ806W*04, PAJ805W*04, PAJ808W, and other 800 series models made in New Zealand, but not the PAK800 series and later models. If you're not sure if it fits your stove, just contact us with your model number. With over 25 years of supplying appliance parts to trade and retail, you can buy with confidence.
Using this Westinghouse oven element is easy. First, make sure your oven is unplugged or the power is off. Carefully remove the old element and install this new one according to the mounting instructions. The single spade terminals should point straight back. When using the oven, set the temperature as you normally would. Remember, this element is only suitable for specific Westinghouse stove models in the 800 series made in New Zealand, so don't try to use it with incompatible models like the PAK800 series. For maintenance, keep the element clean. You can use a soft cloth to wipe off any debris. If you notice any signs of damage, like cracks or breaks, stop using it and contact us for a replacement. Buy with confidence knowing we've been in the appliance parts business for over 25 years.
