This 2500 - watt fan - forced oven element is a great fit for Technika and Blanco ovens. Part number is 03447, SE192, and it's equivalent to Blanco 9666 and similar to 05085, EU015. It operates at 240 volts and has an element diameter of 19 cm. The overall depth from the front to the bracket is 38 mm, and the distance between the top hole and the centre of the mounting bracket is 25.5 cm. The mounting holes on the fixed bracket are 55 mm apart. This is the most commonly used type in many Technika and Blanco fan - forced ovens. Sometimes, the original element might have three loops instead of two. We can't guarantee it fits specific model numbers, so you should compare the dimensions, photos, and description with your existing element. The wattage isn't super critical as long as it's within 100 watts. Some European stoves are rated for 230 volts, so the wattage stamped on the element might be a bit lower. With over 25 years of experience supplying appliance parts to both the trade and retail, you can buy with confidence.
Using this oven element is easy. Just install it following the standard procedures for your Technika or Blanco oven. When installing, make sure to match the dimensions of your old element with this one carefully. If the wattage of your old element is close (within 100 watts), this new element should work well. Note that we can't confirm it fits all specific models, so a good comparison is necessary. For maintenance, keep the element clean. Wipe it gently with a soft, dry cloth after each use. Avoid using abrasive materials that could damage the element. Store it in a dry place when not in use to prevent rust or other damage. If you have any questions during installation or use, feel free to reach out.
