This is a genuine Fisher & Paykel O - ring for the motor rotor of DD60 and DD90 series DishDrawer dishwashers. With part numbers FP523049 and 523049, it's a must - have replacement part. It fits Fisher & Paykel dishdrawer models starting with DD60D, DD60S, and DD90S, such as DD60DCW6 (80713 - A), DD60DCW7 (80893 - B), and many others. Measuring 90mm in diameter and 3.3mm in thickness, this o - ring gasket is placed between the motor rotor's top and the large stainless - steel tub base filter plate. It's incredibly easy to install. We've been supplying high - quality appliance parts to both trade and retail customers for over 25 years, so you can buy with full confidence.
Using this Fisher & Paykel DishDrawer Dishwasher Motor Rotor O - Ring is quite straightforward. First, turn off the dishwasher and unplug it from the power source to ensure safety. Locate the motor rotor and the large stainless - steel tub base filter plate. Remove the old o - ring carefully and clean the area. Then, place the new o - ring (90mm in diameter and 3.3mm thick) between the top of the motor rotor and the filter plate. Make sure it's properly seated. When it comes to maintenance, check the o - ring regularly for signs of wear or damage. If you notice any issues, replace it promptly. And always remember to follow the dishwasher's general maintenance guidelines. If you have any problems during installation or use, feel free to contact our customer service team for assistance.
