This is a 1.9 - metre dishwasher drain hose that is compatible with the Omega DW Series and Smeg SA Series. Part No. is W072, similar to Genuine Part Nos. 758973067 and 758971783. The outlet hose fits some Omega and Smeg dishwashers such as DW2002X, DW2003X, DW2005X, DW2006X, PL663X, SA627X, SA628X, SA660X, SA663X, SA823X, SA4510X - 1, SA5562, SA5563WH, SA8605X, SA8605XTD, SA8210X7, SA8211X, SA8211X2, ST663, ST8805 models. Early SA660 series models might also use this hose, and it may suit other models too. The machine - end has an internal diameter of 28.7mm at a 45 - degree angle, while the sink - end has an internal diameter of 18mm. It's 1.9 metres long, easy to install, and comes with a full guarantee. We've been supplying appliance parts to both the trade and retail sectors for over 25 years, so you can buy with confidence.
Using this dishwasher drain hose is a breeze. First, make sure your dishwasher is turned off and unplugged. Then, connect the end with a 28.7mm internal diameter at a 45 - degree angle to the dishwasher. Next, attach the 18mm internal - diameter end to the sink drain. Once connected, double - check all connections to ensure they are tight. As for maintenance, regularly check the hose for any signs of wear, like cracks or leaks. If you notice any issues, replace the hose promptly. Also, keep the hose clean to prevent blockages. Remember, this hose is fully guaranteed, so if you have any problems, feel free to reach out to us.
