This is a Westinghouse 500 Watt large dual pass defrost element, part number FR-04. It replaces genuine part numbers such as 1433141, 1428879, etc., and is similar to Stokes 10315, 1845D, SEI RF154. The L-shaped double pass defrost heating element is suitable for some Westinghouse frost free refrigerators. It operates at 500 Watt, 240 Volt AC. Measuring 585mm wide with 100mm bent up ends, the wire length is 120mm with 6.4mm spade terminals. It comes with 500mm metal tape, 7 aluminium ties and a 520mm wire extension. It's new old stock with slightly shop - soiled packaging but is fully guaranteed. We've been supplying appliance parts to the trade and retail for over 25 years, so you can buy with confidence.
Using this Westinghouse defrost element is quite easy. First, make sure your refrigerator is unplugged for safety. Locate the old defrost element in your frost - free refrigerator and carefully remove it. Then, install this new element in its place, connecting the wires to the 6.4mm spade terminals. You can use the 500mm metal tape and 7 aluminium ties provided to secure it properly. When it comes to the wire extension, connect it as needed. Remember to always keep the refrigerator unplugged when working on the element. As for maintenance, keep an eye on the element's performance. If you notice any issues like reduced defrosting efficiency, check the connections. Since it's new old stock, although it's fully guaranteed, handle it gently to avoid any damage. If you have any problems, don't hesitate to contact us as we have over 25 years of experience in supplying appliance parts.
