This is a top - notch filter set designed for Volta, AEG, Tornado, and Zanussi Cyclon Power vacuum cleaners. Part No. F138 includes a Hepa exhaust filter and a micromesh/foam pre - motor filter. The micromesh foam filter has a diameter of 141mm and is 25mm thick, while the Hepa filter measures 156mm in width, 88mm in height, and 16mm in thickness. It fits the Volta Cyclon Power U7820 model and is also suitable for AEG AE7810, Zanussi ZAN7800, ZAN7820, and Tornado TO7800, TO7810 models. With over 25 years of experience in supplying appliance parts, you can buy with confidence.
Using this filter set is easy. First, turn off your vacuum cleaner and unplug it from the power source. Then, locate the old filter compartment and carefully remove the old filters. Take out the new Hepa exhaust filter and the micromesh/foam pre - motor filter from the package. Place the micromesh/foam pre - motor filter in its designated spot, making sure it fits snugly. Next, insert the Hepa exhaust filter correctly. Close the filter compartment. When it comes to maintenance, it's a good idea to check the filters regularly, say every 1 - 2 months depending on how often you use your vacuum. If the filters look dirty or clogged, you can gently clean the micromesh/foam filter with a soft brush or replace it if it's too worn. The Hepa filter may need to be replaced when it loses its filtering efficiency. Also, always make sure the vacuum is off and unplugged before you start any maintenance work.
