This is a genuine Vax Hepa filter cartridge and pre - motor filter set. The genuine part numbers are VCATFLT and VXVCATFLT. It is suitable for Vax VCAB1500, VCABW1500, VCAP1500, and VCAPH1500 Air Cylinder vacuum cleaner models. The kit comes with an antibacterial hepa post - motor filter cartridge and a washable pre - motor filter. The hepa filter has a diameter of 122.8mm and a height of 28.5mm, while the pre - motor filter has a diameter of 148.6mm and a thickness of 20mm. Certified with 'Hepa Filtration', it can capture 99.97% of household dust, pollen, mites, and microscopic particles as small as 0.3 microns, and 99.5% down to 0.1 microns. With normal use, these filters should be replaced every 12 months. We've been supplying appliance parts to both the trade and retail sectors for over 25 years, so you can buy with confidence.
Using this Vax filter set is easy. First, turn off your Vax vacuum cleaner and unplug it from the power source. Open the filter compartment and carefully remove the old filters. Then, install the new antibacterial hepa post - motor filter cartridge and the washable pre - motor filter in their respective places. Make sure they fit snugly. When it comes to maintenance, the pre - motor filter can be washed under running water. Let it dry completely before reinstalling it. The hepa filter can't be washed and should be replaced every 12 months during normal use. Always remember to turn off and unplug your vacuum cleaner before doing any filter changes. Also, store the filters in a dry place to keep them in good condition.
