This is a genuine Vax Hepa filter cartridge and pre - motor filter set. The genuine part numbers are VCABFLT and VXVCABFLT. It is suitable for Vax VCAB1500, VCABW1500, and VCAT1500 Air Cylinder models. The kit comes with an antibacterial hepa post - motor filter cartridge, a washable pre - motor filter, and a small foam filter. The hepa filter has a diameter of 122.8mm and a height of 28.5mm. The pre - motor filter has a diameter of 148.6mm and a thickness of 20mm. The foam filter measures 58mm x 37mm x 10mm. Certified with 'Hepa Filtration', it can capture 99.97% of household dust, pollen, mites, and microscopic particles as small as 0.3 microns, and 99.5% down to 0.1 microns. For normal use, these filters should be replaced every 12 months. We have 25+ years of experience in supplying appliance parts to both trade and retail, so you can buy with confidence.
Using this Vax filter set is easy. First, make sure your Vax vacuum cleaner (VCAB1500, VCABW1500, or VCAT1500 models) is turned off and unplugged. Then, locate the filter compartments and carefully remove the old filters. Install the new antibacterial hepa post - motor filter cartridge, the washable pre - motor filter, and the small foam filter in their respective places. When it comes to maintenance, the pre - motor filter is washable. Just take it out, rinse it gently under water, and let it dry completely before putting it back. Remember, these filters are designed to capture a large amount of dust and particles. So, for normal use, replace them every 12 months to keep your vacuum working at its best. If you have any questions during use, don't hesitate to contact us.
