Genuine Vax Hepa Filter Cartridge and Pre - Motor Filter Set. It's a genuine part with numbers VCP7TPFLT2 and VXVCP7PTFLT2. This set is suitable for Vax VX72, VX74, VX75, VX39, VX57, VX77, and VCP7P2400 models. The kit comes with an antibacterial hepa post - motor filter cartridge and a washable pre - motor filter. The hepa filter has dimensions of 125mm X 97mm x 28mm, and the pre - motor filter is 175mm in diameter and 20mm thick. Certified for 'Hepa Filtration', it can capture 99.97% of household dust, pollen, mites, and microscopic particles as small as 0.3 microns, and 99.5% down to 0.1 microns. For normal use, these filters should be replaced every 12 months. With over 25 years of experience in supplying appliance parts to both trade and retail, you can buy with confidence.
Using your Vax Power 7 V2 Pet Antibacterial Hepa Filter Set is easy. First, make sure your Vax vacuum cleaner (models VX72, VX74, VX75, VX39, VX57, VX77, and VCP7P2400) is turned off and unplugged. Then, locate the filter compartments and carefully remove the old filters. Install the new antibacterial hepa post - motor filter cartridge and the washable pre - motor filter in their respective places. When using the vacuum, the filters will start capturing dust, pollen, and other small particles right away. Remember, for normal use, you should renew these filters every 12 months to keep your vacuum working at its best. If the pre - motor filter gets dirty, you can wash it with water and let it dry completely before putting it back. Also, always check the filter dimensions (hepa filter: 125mm X 97mm x 28mm; pre - motor filter: 175mm diameter x 20mm thickness) to ensure a proper fit.
