This is a set of 2 high - quality brush roller drive belts specifically designed for Vax upright vacuum cleaners. The set includes one short and one long belt, with diameters of 68mm and 80mm (unstretched) and a width of 12mm. These belts are made by Qualtex, with part number PPP124. They are compatible with a wide range of Vax upright vacuum cleaner models, such as 8000, 8000SX, 8100SX, FHL1300, FHL1400, 40 - 001, 40 - 002, New Wave 41 - 001, 41 - 002, NW1100, NW1300, T1000, T1100, T1200, and T1300. We've been in the appliance parts supply business for over 25 years, so you can buy with confidence. To extend the lifespan of the belts, always ensure the brush roller is free from hair and fluff.
Using these Vax vacuum cleaner belts is easy. First, turn off and unplug your Vax upright vacuum cleaner. Then, open the part of the vacuum where the old belts are located. Remove the old belts carefully. Take the new belts from the pack (remember one is short and one is long). Fit them onto the appropriate parts of the brush roller as per your vacuum cleaner's design. Close the vacuum back up. When using your vacuum, make sure to clean the brush roller regularly. Check it for hair and fluff and remove any build - up. This will help the belts last longer. Also, if you notice the belts start to look worn or are not working properly, it's a good idea to replace them right away. With these tips, you'll keep your Vax vacuum cleaner running smoothly.
