These two vacuum cleaner brush roller drive belts are specially designed to be compatible with Panasonic MCE4xx Series and MCE5xx Series upright vacuum cleaners. The Stokes Part No. is V8494, and they are equivalent to Qualtex Part No. PPP116, PPP116OQ, and Menalux part no. DB19. With a belt width of 10mm and an unstretched diameter of 125mm, these belts offer a perfect fit for a wide range of Panasonic models, including MCE41, MCE42, MCE43, MCE45, MCE46, MCE47, MCE450, MCE451, MCE452, MCE453, MCE455, MCE456, MCE457, MCE458, MCS459, MCE460, MCE460K, MCE461, MCE461K, MCE463, MCE463K, MCE464, MCE465, MCE467, MCE468, MCE469, MCE470, MCE471, MCE472, MCE480, MCE481, MCE53, MCE54, MCE55, MCE540, MCE553, MCE554, MCE555, MCE560, MCE561, MCE561K, MCE562, MCE562K, MCE453, MCE563K, MCE564, MCE564K, MCE566, MCE567, MCE567K, MCE568, MCE569, MCE593. We've been supplying appliance parts to trade and retail for over 25 years, so you can buy with confidence. To keep the belts in good shape, always make sure the brush roller isn't clogged with hair and fluff, which can help extend the belts' lifespan.
Using these vacuum cleaner belts is easy. First, make sure your vacuum cleaner is turned off and unplugged. Then, locate the old belt and carefully remove it from the brush roller and motor pulley. Next, take one of the new belts and stretch it around the brush roller and the motor pulley. Make sure it's properly seated and there are no twists. When using your vacuum cleaner, try to avoid picking up large or sharp objects that could damage the belt. Also, regularly check the brush roller and clean out any hair or fluff that has collected on it. This will not only keep the belt in good condition but also help your vacuum cleaner work more efficiently. If you notice the belt starting to wear out or break, replace it right away with the second belt in the pack. With proper use and maintenance, these belts will serve you well for a long time.
