Upgrade your Hoover TurboPower 2 or 3 vacuum cleaner with these high - quality Qualtex brush drive belts. Each pack contains 2 belts, which are the perfect replacement for genuine Hoover parts. Part numbers include PPP112, QUAPPP112OQ, and RDB35. They're equivalent to VacSpare 32100039 and UniFit 1805, and can replace Genuine Hoover Part Nos. 681751, 09071606, etc. These belts fit a wide range of Hoover models, like TurboPower 2, TurboPower 3, U2090, and many others. The belts have an unstretched diameter of 120mm and a width of 11.5mm. We've been in the appliance parts business for over 25 years, so you can buy with confidence. To make the belts last longer, always check and clean the brush roller from hair and fluff.
Using these belts is easy. First, make sure your Hoover TurboPower 2 or 3 vacuum is turned off and unplugged. Then, locate the brush roller area and carefully remove the old belts. Install the new belts onto the brush roller, ensuring they fit snugly. When using your vacuum, be aware that if the brush roller gets clogged with hair and fluff, it can put extra strain on the belts. So, regularly check the brush roller and clean it to keep the belts in good shape. For maintenance, store the belts in a cool, dry place when not in use. This will prevent them from deforming or getting damaged. With proper use and care, these belts will serve you well for a long time.
