This single universal white stove control knob is a great replacement part. Part numbers include KNB36, OVK060, and OVK058W. It can replace numerous hotplate simmerstat control and gas burner control knobs on a wide range of stoves and cooktops. It's perfect when the original parts are unavailable and also suitable for other applications. The knobs have a simple marking to show the pointing direction and no other markings. The kit comes with one white knob and one each of three different inserts, making it compatible with most standard common simmerstat and burner shaft sizes. The knob has a diameter of 40mm and a height of 24.5mm. It includes flush inserts for 6mm and 8mm D shaft sizes, as well as 15mm long inserts for 6mm and 8mm D shaft sizes. The inserts can be adjusted so the flat side of the D can be in various positions. The listing is for a single knob. Note that these knobs might be a bit loose on some 6mm shafts, and silicone sealant can be used to prevent them from slipping off. With over 25 years of supplying appliance parts to both the trade and retail, you can buy with confidence.
Using this stove control knob is easy. First, select the appropriate insert from the three provided in the kit according to the size of your stove's shaft. Insert it into the knob, making sure the flat side of the D - shaped insert is in the right position for your stove. Then, simply place the knob onto the shaft of your stove's burner or simmerstat. When it comes to maintenance, keep the knob clean by wiping it with a soft, damp cloth. If you notice any dirt or grime in the insert area, you can gently clean it with a small brush. Remember, these knobs may fit loosely on some 6mm shafts. If that's the case, apply a bit of silicone sealant to keep the knob firmly in place and prevent it from slipping off. This way, you can enjoy using your stove worry - free.
