Panel Mount Fuseholder for 20mm x 5mm Fuses - Part # FH31

This 20mm x 5mm panel mount fuseholder, Part No. FH31, is made of small high-temperature plastic. It's designed for M205 and DA205 fuses. It only protrudes 2mm from the chassis and needs a 12mm hole in the chassis. You can open it with a coin or a screwdriver. It comes with solder tags. We've been supplying appliance parts to trade and retail for over 25 years, so you can buy with confidence.

Using this fuseholder is easy. First, make a 12mm hole in the chassis where you want to install it. Then, mount the fuseholder in the hole. It only sticks out 2mm from the chassis, so it won't take up much space. To open the fuseholder, you can use a coin or a screwdriver. When you need to replace the fuse, just open it up and swap the old one for a new M205 or DA205 20mm x 5mm fuse. Remember, always turn off the power before replacing the fuse to stay safe. As for maintenance, keep it clean and dry. Check it regularly to make sure the solder tags are in good condition. With over 25 years of experience in supplying appliance parts, you can trust this product.