This is a single - row motor pulley designed for large, older Hoover washing machines. Part numbers include H094 and HA011. It's used in old 800 series and some 900 series 6kg machines with a large cast gearbox, base - mounted motor, and base - mounted electric pump. Note that some later models use a different pulley with a D - shaped bevelled fitting attached by a bolt from below, while this one has a grub screw and a 1/2 - inch hole. The pulley has a diameter of 64mm, a height of 21mm, and a 12.5mm hole, and it attaches with a grub screw. We've been supplying appliance parts to the trade and retail for over 25 years, so you can buy with confidence.
Using this Hoover single - row motor pulley is easy. First, make sure your washing machine is an older large model from the 800 or some 900 series 6kg machines with a large cast gearbox, base - mounted motor, and base - mounted electric pump. When installing, use the grub screw to attach it firmly. Remember, it has a 1/2 - inch hole and specific dimensions (64mm in diameter and 21mm in height). For maintenance, check the pulley regularly for any signs of wear or damage. If you notice any issues, replace it as soon as possible. Also, keep in mind that some later models use a different type of pulley, so ensure you have the right one for your machine.
