This high - voltage glass fuse is designed for use in some microwave ovens. It comes with leads and a cover, and you can choose the rating you need. The part number is MWFxx, where xx can be 60, 70, 75, 80, or 100 depending on the value. Available amperage ratings are 600mA (0.6A), 700mA (0.7A), 750mA (0.75A), 800mA (0.8A), and 1000mA (1A). The maximum voltage rating is 5000 Volts. The fuse has long 180mm leads fitted with right - angled 6.4mm spade terminals, and the fuse body is 100mm long. When placing an order, please specify the current rating you require. We've been supplying appliance parts to both the trade and retail sectors for over 25 years, so you can buy with confidence. Remember, these fuses should only be replaced by qualified technicians who know about microwave ovens. The voltages inside a microwave oven are extremely high and dangerous, and they can remain even after the appliance is turned off and unplugged from the mains.
How to use: These fuses are for microwave ovens. Only a qualified technician who knows about microwave ovens should replace them. First, make sure the microwave is turned off and unplugged from the power source. Then, carefully remove the old fuse and replace it with the new one of the correct amperage rating. Note: The voltages inside a microwave oven are very high and dangerous. They can stay in the appliance long after it's turned off and unplugged. So, never try to replace the fuse yourself if you're not a qualified technician. Maintenance advice: There's not much maintenance for the fuse itself. But regularly check your microwave oven for any signs of damage or malfunction. If you notice any issues, it might be a good idea to have the fuse checked as well. Always keep the microwave clean to prevent any electrical problems.
