The Fisher & Paykel Dryer Multi-V Drum Belt is a high-quality replacement part. Part numbers are POL58 and B043, and it has markings - Qualtex POL58 3PJ1800/709J. It's equivalent to FP460529, 460529, FP460529P, and 460529P. Supplied by Qualtex UK, it's the same as the genuine belt but comes in a different package. With a belt length (circumference) of 1800mm and 3 ribs, it fits the main drum drive in most early Fisher & Paykel dual - direction dryers. It's not suitable for very early models with a white push - to - start switch or AD30 series models. However, it fits all AD50 & ED series dryers and newer DE45 & DE50 series models, including AD52, AD53, AD55, ED50, ED52, ED53, ED54, ED55, ED56, ED56U, DE45F56AW, DE45F56AW1, DE45F56EW, DE45F56EW1, DE50F56A, DE50F56A1, DE50F56E, DE50F56E1 and possibly other models. We've been in the appliance parts business for over 25 years, so you can buy with confidence.
Using this Fisher & Paykel dryer drum belt is straightforward. First, make sure your dryer is unplugged for safety. Remove the old belt from the drum drive following your dryer's user manual. Then, place the new belt around the drum drive, ensuring it fits snugly with the 3 ribs in place. Plug your dryer back in and start a test cycle. As for maintenance, regularly check the belt for any signs of wear, like fraying or cracking. If you notice any issues, replace the belt promptly to avoid further damage to your dryer. Also, keep the area around the belt clean from lint and debris. Remember, this belt isn't suitable for very early models with a white push - to - start switch or AD30 series models, so always double - check your dryer model before installation.
