This is a high - quality 1700W bottom oven element. It's a genuine part with numbers ET482101, ERM886, and Ego's 20.40915.000. Operating at 240 volts, it has specific dimensions: 50.5cm in width, 33.5cm in depth, and an overall depth of 38.5mm from the front to the mounting bracket. Each end of the element features single 6.4mm spade terminals that stick out 30mm behind the mounting bracket, and the element ends are 24mm apart. The mounting bracket has studs 54mm apart. This element fits certain new Westinghouse, Electrolux, Euro, and Euromaid ovens like DSK963SNG, DSK965SNG, ECR90SS, etc. If you're not sure if it suits your oven, contact us with your full model number before buying. With over 25 years of experience in supplying appliance parts, you can buy with confidence.
Using this oven element is quite straightforward. First, make sure your oven is turned off and unplugged to avoid any electrical hazards. Then, carefully remove the old element and install this new one in its place, ensuring the terminals are properly connected. When in use, always follow your oven's normal operating procedures. As for maintenance, keep the element clean. You can use a soft, dry cloth to wipe off any dirt or debris after it has cooled down completely. If you notice any damage to the element, such as cracks or breaks, stop using it immediately and contact us for a replacement. And remember, if you're ever unsure about anything, don't hesitate to get in touch with us for more help.
